test-signal frame-size
Use this command to configure an ETH test signal frame size which is applicable only for generator test signal mode.
Use no form of this command to delete the configured ETH test signal frame size.
Command Syntax
test-signal frame-size <68-9600>
no test-signal frame-size
Parameters
<68-9600>
Specify the frame size within the range
Command Mode
Configure CFM ETH test mode
Default
None
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#ethernet cfm test-signal profile-name 123
(config-cfm-eth-tst)#test-signal frame-size 124
(config-cfm-eth-tst)#no test-signal frame-size
Last modified date: 10/20/2023