test-signal test-type
Use this command to configure an ETH test signal test type is service interrupting or not.
Use no form of this command to delete the configured ETH test signal test type.
Command Syntax
test-signal test-type (in-service|out-of-service)
no test-signal test-type
Parameters
in-service
This indicates the ETH-Test is in-service and normal client service traffic is not interrupted
out-of-service
This indicates the ETH-Test is out-of-service and normal client service traffic is not disrupted
Command Mode
Configure CFM ETH test mode
Default
None
Applicability
This command was introduced in OcNOS version 4.0.
Example
#configure terminal
(config)#ethernet cfm test-signal profile-name 123
(config-cfm-eth-tst)#test-signal test-type in-service
(config-cfm-eth-tst)#no test-signal test-type
Last modified date: 10/20/2023