ethernet oam remote-loopback (start|stop)
Use this command to start or stop remote loopback.
Command Syntax
ethernet oam remote-loopback start
ethernet oam remote-loopback stop
Parameters
start
Specify to start remote loopback.
stop
Specify to stop remote loopback.
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1
(config-if)#ethernet oam remote-loopback start
#configure terminal
(config)#interface xe1
(config-if)#ethernet oam remote-loopback stop
Last modified date: 10/20/2023