OcNOS-SP : Carrier Ethernet Guide : Carrier Ethernet Command Reference : EFM OAM Commands : ethernet oam timeout
ethernet oam timeout
Use this command to set the OAM timeout.
Use the no form of this command to reset the timeout to its default.
Command Syntax
ethernet oam timeout <2-30>
no ethernet oam timeout
Parameter
<2-30>
Number of seconds for the link timeout
Command Mode
Interface mode
Default
The default timeout is 5 seconds
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1
(config-if)#ethernet oam timeout 5
 
(config)#interface xe1
(config-if)#no ethernet oam timeout
Last modified date: 10/20/2023