instance
Use this command to set instance-id for a particular g8031 protection group.
Use the no form of this command to remove instance-id for a g8031 protection group.
Note: Once instance is configured, working and protection ports can not be modified.
Command Syntax
instance <1-63>
no instance
Parameters
<1-63>
instance-id
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#instance 3
Last modified date: 10/20/2023