timer wait-to-restore
Use this command to configure wait-to-restore timer for a g8031 protection group.
Use the no form of this command to set default wait-to-restore value for a g8031 protection group.
This command is only applicable for revertive mode.
Command Syntax
timer wait-to-restore <300-720>
no timer wait-to-restore
Parameters
<300-720>
Timer value in seconds.
Default
300 seconds.
Command Mode
G8031 Switching Mode.
Applicability
This command was introduced before OcNOS version 5.0.
Examples
#configure terminal
(config)#g8031 eps-id 10 bridge 1
(g8031-config-switching)#mode one-and-one-bidirectional
(g8031-config-switching)#revertive
(g8031-config-switching)#timer wait-to-restore 360
Last modified date: 10/20/2023