ip verify unicast source reachable-via
Use this command to configure Unicast Reverse Path Forwarding with source-specific reachability on the interface level.
Use the no form of the command to disable Unicast Reverse Path Forwarding with source-specific reachability on the interface level.
Command Syntax
ip verify unicast source reachable-via (any | rx )
no ip verify unicast source reachable-via
Parameters
any
Source is reachable via any interface
rx
Source is reachable via an interface on which packet was received
Default
N/A
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS SP Version 6.0
Examples
#configure terminal
(config)#interface xe1
(config-if)#ip verify unicast source reachable-via any
(config-if)#ip verify unicast source reachable-via rx
(config-if)#no ip verify unicast source reachable-via
Last modified date: 10/16/2023