maximum-paths
Use this command to set the maximum number of paths to install in the FIB (Forwarding Information Base) for the ECMP (Equal-Cost MultiPath) feature.
Use the no parameter with this command to revert to default.
Note: If you change the number of paths from the default (8), you must save the running configuration and perform a reboot.
Command Syntax
maximum-paths <1-64>
no maximum-paths
Parameter
<1-64>
Maximum number of paths to install in the FIB
Default
By default, the maximum number of paths is 8.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#maximum-paths 5
Last modified date: 10/16/2023