OcNOS-SP : Layer 3 Guide : Fundamental Layer 3 Command Reference : Fundamental Layer 3 Commands : router-id
router-id
Use this command to add a router identifier for this system.
Use the no form of this command to disable this function.
Command Syntax
router-id A.B.C.D
no router-id (A.B.C.D)
Parameters
A.B.C.D
Router identifier in IP address format for this system.
Default
None
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#router-id 123.12.3.123
(config)#
Last modified date: 10/16/2023