OcNOS-SP : Layer 3 Guide : Fundamental Layer 3 Command Reference : Fundamental Layer 3 Commands : Show ipv6 route track-table
Show ipv6 route track-table
Use this command to display ipv4 static routes that are associated to a tracking id across all vrfs.
Command Syntax
Show ipv6 route track-table
Parameters
None
Default
NA
Command Mode
Privileged Exec mode and Exec mode
Applicability
This command was introduced in OcNOS version 5.1.
Examples
#show ipv6 route track-table
ipv6 route 5000::/64 eth1 track 10 state is [up]
Last modified date: 10/16/2023