show running-config router
Use this command to display the running system router configuration.
Command Syntax
show running-config router bgp
show running-config router isis
show running-config router ldp
show running-config router ospf
show running-config router rip
show running-config router rsvp
show running-config router vrrp
Parameters
bgp
Display Border Gateway Protocol (BGP) information.
isis
Display Intermediate System to Intermediate System (IS-IS) information.
ldp
Display Label Distribution Protocol (LDP) information.
ospf
Display Open Shortest Path First (OSPF) information.
rip
Display Routing Information Protocol (RIP) information.
rsvp
Display Resource Reservation Protocol (RSVP) information.
vrrp
Display Virtual Router Redundancy Protocol (VRRP) information.
Default
None
Command Mode
Privileged exec mode, configure mode, router-map mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
>enable
#show running-config router vrrp
!
router-id 3.3.3.3
!
Last modified date: 10/16/2023