class type queuing
Use this command to add a queuing class-map to a queuing policy map.
Default queuing class cannot be deleted.
Command Syntax
class type queuing default (q0|q1|q2|q3|q4|q5|q6|q7)
Parameters
NAME
Specify the class map name
<q0-q7>
Default queue name
Default
No default value is specified
Command Mode
Policy Map type queuing Mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#
(config)#policy-map type queuing default default-out-policy
(config-pmap-que)#class type queuing default q0
Last modified date: 10/20/2023