egress l3 exp encap map (Qumran)
Use this command to map a DSCP value to the some EXP value.
For L3 traffic, use the no form of this command to remove the map.
Command Syntax
l3 dscp <0-63> exp <0-7>
no l3 dscp <0-63>
Parameters
<0-63>
DSCP value
<0-7>
EXP value
Default
By default, 8 DSCP values are mapped to one exp.
For example: DSCP 0-7 exp 0, DSCP 8-15 exp 1.
Command Mode
config-egress-exp-encap-map
Applicability
This command was introduced in OcNOS version 3.0 and this command is applicable for Qumran.
Example
(config)#qos profile exp-encap default
(config-egress-exp-encap-map)#l3 dscp 20 exp 1
(config-egress-exp-encap-map)#l3 dscp 40 exp 2
Last modified date: 10/20/2023