ingress cos map
Use this command to map a CoS value to the queue.
Use the no form of this command to remove the map.
Note: Color mapping is fixed: DEI 0 will be mapped to color “green” and DEI 1 will be mapped to color “yellow.”
Command Syntax
cos <0-7> queue <0-7>
no cos <0-7>
Parameters
<0-7>
CoS value
<0-7>
Identifying queue number
Default
By default, CoS to queue mapping is one to one.
Command Mode
config-ingress-cos-map
Applicability
This command was introduced in OcNOS version 3.0.
Example
(config)#qos profile cos-to-queue default
(config-ingress-cos-map)#cos 1 queue 2
Last modified date: 10/20/2023