low-delay-tolerance-profile
Use this command to configure low delay tolerance profile on queues.
Use the no command to remove the applied profile.
Command Syntax
low-delay-tolerance-profile
no low-delay-tolerance-profile
Parameters
None
Default
By default, applied to queue 7 implicitly
Command Mode
Policy-class-map queuing mode
Policy map-class type queuing mode
Applicability
This command was introduced in OcNOS version 4.0
Examples
(config)#policy-map type queuing default default-out-policy
(config-pmap-que-def)#class type queuing default q0
(config-pmap-c-que-def)#low-delay-tolerance-profile
Last modified date: 10/20/2023