match access-group
Use this command to classify the group based on the access group.
Use the no command remove access group match criteria from a class map
Note: Match access-group is allowed only in “match-any” class type.
When match access-grp is configured, no more match criteria can be supported in the class-map.
When access-list is being used in class-map for match, only “permit rules” are allowed in the access-list.
Command Syntax
match access-group NAME
Parameters
NAME
Specify the access group name
Default
No default value is specified
Command Mode
Class-map mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)# class-map match-any class_acl
(config-cmap-qos)# match access-group my_acl
Last modified date: 10/20/2023