priority (QoS)
Use this command to set the user priority for the class attached to this policy-map
Use the no parameter with this command to unset the priority value
Note: The higher the priority number, higher the priority for the class in a policy-map.
User configured priority takes effect over default priority.
Command Syntax
priority <1-1000>
no priority
Parameters
<1-1000>
Priority value
Default
No default value is specified
Command Mode
Policy-class-map mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
#configure terminal
(config)#policy-map pmap1
(config-pmap)#class cmap1
(config-pmap-c)#priority 20
Last modified date: 10/20/2023