qos (enable | disable)

OcNOS-SP : Quality of Service Guide : Quality of Service Command Reference : Quality of Service Commands : qos (enable | disable)

Use this command to globally enable or disable Quality-of-Service (QoS).

Note: Enabling or disabling QoS is a disruptive operation, stopping all traffic on ports which causes traffic loss.

Command Syntax

qos (enable | disable)

Parameters

None

Default

By default, QoS is disabled

Command Mode

Configure

Applicability

This command was introduced in OcNOS version 3.0.

Examples

#configure terminal

(config)# qos enable

(config)#qos disable

Last modified date: 10/20/2023