qos profile exp-encap (Qumran)
Use this command to create new profiles or to update "default" exp encapsulation profiles. These profiles are applicable on the nodes where MPLS label is inserted.
Use the no form of this command to remove the exp encapsulation profiles.
Note: exp-encap profile will be ineffective on tunnels with only 2 nodes with PHP configuration.
Command Syntax
qos profile exp-encap (NAME|default)
no qos profile exp-encap NAME
Parameters
exp-encap
Profile for the exp encapsulation map
NAME
Profile map name (maximum 32 characters)
Default
By default, “default” profile is created for all the profile types. These profiles can only be updated by the user neither be created nor be destroyed.
Command Mode
Configure modes
Applicability
This command was introduced in OcNOS version 3.0 and this command is applicable for Qumran.
Example
To create a new profile:
(config)#qos profile exp-encap exp-encap-map
Last modified date: 10/20/2023