qos profile precedence-to-precedence
Use this command to set the precedence to precedence profile.
Use the no form of this command delete the profile.
Use
show qos-profile to show the profile detail.
Use
qos map-profile (Qumran) to map the profile on interface.
Command Syntax
qos profile precedence-to-precedence (NAME|)precedence <0-7> precedence <0-7>
Parameters
NAME
The profile name to be created
precedence <0-7>
In precedence value
precedence <0-7>
Out precedence value
Command Mode
Configure modes
Applicability
This command was introduced in OcNOS version 5.0.
Example
#configure terminal
(config)#qos profile precedence-to-precedence prec-prec-map
(config-egress-prec-map)#precedence 1 precedence 0
(config)#interface xe3
(config-if)#qos map-profile precedence-to-precedence prec-prec-map
Last modified date: 10/20/2023