qos untagged-priority
Use this command to set internal priority for untagged traffic on L2 ports.
Use the no form of the command to remove the configuration.
Note: This command is applicable only on L2 ports.
Command Syntax
qos untagged-priority <0-7>
no qos untagged-priority
Parameters
qos
Quality of Service
untagged-priority
Internal priority for untagged traffic
<0-7>
Value
Default
No default value is specified
Command Mode
Interface mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#interface xe1
(config-if)#qos untagged-priority 3
Last modified date: 10/20/2023