show qos-profile interface
Use this command to show the all configured QoS profiles configurations attached on an interface.
Command Syntax
show qos-profile interface NAME
Parameters
NAME
Profile map name (maximum 32 characters)
Command Mode
Exec, config, interface, class-map, policy-map and policy-map-class
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#show qos-profile interface xe11
profile name: cos-map
profile type: cos-to-queue
mapping:
qos profile cos-to-queue cos-map
cos 0 dei 0 queue 0 color green
cos 0 dei 1 queue 0 color yellow
cos 0 queue 0
cos 1 dei 0 queue 1 color green
cos 1 dei 1 queue 1 color yellow
cos 1 queue 1
cos 2 dei 0 queue 2 color green
cos 2 dei 1 queue 2 color yellow
cos 2 queue 2
cos 3 dei 0 queue 3 color green
cos 3 dei 1 queue 3 color yellow
cos 3 queue 3
cos 4 dei 0 queue 4 color green
cos 4 dei 1 queue 4 color yellow
cos 4 queue 4
cos 5 dei 0 queue 5 color green
cos 5 dei 1 queue 5 color yellow
cos 5 queue 5
cos 6 dei 0 queue 6 color green
Last modified date: 10/20/2023