wfq-queue weight
Use this command to set WFQ-queue weight for a queue.
Use the no form of the command to un-set configured WFQ configuration.
Command Syntax
wfq-queue weight <1-127>
no wfq-queue weights
Parameters
<1-127>
WFQ queue weight to be configured.
Default
No default value is specified
Command Mode
Policy-class-map queuing Mode
Applicability
This command was introduced in OcNOS version 3.0.
Examples
(config)#policy-map type queuing default default-out-policy
(config-pmap-que-def)# class type queuing default q0
(config-pmap-c-que-def)#wfq-queue weight 2
Last modified date: 10/20/2023