address-family ipv6
Use this command to enter 'address-family ipv6' mode, where users can configure IPv6 routing specific configuration.
Use the no parameter with this command to remove all configuration under 'address-family ipv6'.
Command Syntax
address-family ipv6 (unicast|)
no address-family ipv6 (unicast|)
Parameters
unicast
Specify unicast routing for IPv6.
Default
Unicast routing is not configured.
Command Mode
Router mode
Example
#configure terminal
(config)#router isis bb
(config-router)#address-family ipv6 unicast
Last modified date: 10/16/2023