ldp multicast-hellos

OcNOS-SP : Multi-Protocol Label Switching Guide : Label Distribution Protocol Command Reference : LDP Commands : ldp multicast-hellos

Use this command to enable multicast hello exchange on a specified interface.

Use the no parameter to disable multicast hello exchange. R

Command Syntax

ldp multicast-hellos

no ldp multicast-hellos

Parameters

None

Default

By default, ldp multicast hello is enabled

Command Mode

Interface mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

#configure terminal

(config)#interface eth0

(config-if)#ldp multicast-hellos

Last modified date: 10/17/2023