mpls ilm-ecmp
Use this to enable ECMP for LDP ILM.
Use no of this to disable ECMP for LDP ILM.
Note: Entropy is also required to be configured for load-balancing to work.
Note: LDP has to be configured with no-php for entropy to work (Q1 platforms).
Command Syntax
mpls ilm-ecmp
no mpls ilm-ecmp
Parameters
None
Default
LDP ECMP on transit nodes is disabled. If LDP load-balancing is required on transit nodes, enable this option.
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 6.1.0.
Example
#configure terminal
(config)#mpls ilm-ecmp
(config)#no mpls ilm-ecmp
Last modified date: 10/17/2023