mpls ldp-igp sync isis
Use this command to enable LDP ISIS synchronization and to set the holddown timer for synchronization.
Use the no parameter to disable the LDP ISIS synchronization.
Note: Holddown timer value should be higher than LDP IGP sync timer.
Command Syntax
mpls ldp-igp sync isis (level-1|level-2|level-1-2) (holddown-timer <1-2147483>| )
Parameters
level-1|level-2|level-1-2
The ISIS level.
holddown-timer
How long IGP should wait for LDP to converge in seconds.
Default
None
Command Mode
Interface configuration mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
#int eth 1
#mpls ldp-igp sync isis level-1-2 holddown-timer 500
Last modified date: 10/17/2023