OcNOS-SP : Multi-Protocol Label Switching Guide : Label Distribution Protocol Command Reference : LDP Commands : pw-status-tlv
pw-status-tlv
Use this command to enable the use of the PW Status TLV to signal the pseudowire status.
Use the no option with this command to disable the use of the PW Status TLV to signal the pseudowire status.
Command Syntax
pw-status-tlv
no pw-status-tlv
Parameters
None
Default
By default, pw status tlv is disabled
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router ldp
(config-router)#pw-status-tlv
Last modified date: 10/17/2023