rlfa-ilm-optimization
Use this command to enable ILM optimization for rLFA. When ILM optimization is enabled, ILM delete and POP operations are delayed. ILM delete/POP configuration is delayed to make sure rLFA backup path is not removed immediately upon IGP network convergence.
Use the no parameter with this command to revert this configuration.
Command Syntax
rlfa-ilm-optimization
no rlfa-ilm-optimization
Parameter
None
Default
By default, ILM optimization is disabled.
Command Mode
Router(LDP) Config mode.
Applicability
This command was introduced before OcNOS version 6.2.0.
Example
(config)#router ldp
(config-router)# rlfa-ilm-optimization
Last modified date: 10/17/2023