targeted-peer-hello-interval
Use this command to set the interval for sending unicast hello packets to targeted peers.
Use the no parameter with this command to revert to the default targeted-peer hello-interval value.
Command Syntax
targeted-peer-hello-interval <1-21845>
no targeted-peer-hello-interval
Parameter
<1-21845>
Specify the interval in seconds.
Default
By default, targeted peer hello interval is 15 seconds.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router ldp
(config-router)#targeted-peer-hello-interval 1
Last modified date: 10/17/2023