targeted-peer-hold-time
Use this command to set the time-out value that is the time that the router waits before rejecting an adjacency with targeted peers.
Use the no parameter to revert to the default targeted-peer hold-time value.
Command Syntax
targeted-peer-hold-time <3-65535>
no targeted-peer-hold-time
Parameter
<3-65535>
Specify the interval in seconds.
Default
By default, hold time is 45 seconds.
Command Mode
Router mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#router ldp
(config-router)#targeted-peer-hold-time 555
(config-router)#no targeted-peer-hold-time
Last modified date: 10/17/2023