OcNOS-SP : Multi-Protocol Label Switching Guide : Label Distribution Protocol Command Reference : LDP Show Commands : show ldp igp sync
show ldp igp sync
Use the following command to display the LDP synchronization status.
Command Syntax
show ldp igp sync
show mpls ldp igp sync
Parameter
None
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#show ldp igp sync
eth1
LDP configured; LDP-IGP Synchronization enabled.
Sync status: sync achieved
Delay timer: Not Configured , Not Running
 
Last modified date: 10/17/2023