show ldp inter-area-fecs
Use this command to show all FECs using the LPM-based mapping procedure.
Command Syntax
show ldp inter-area-fecs
show ldp inter-area-fecs (ipv4|ipv6|) (count)
Parameter
ipv4
IPv4 FECs
ipv6
IPv6 FECs
count
Count of FECs
Command Mode
Exec mode and Privileged Exec mode
Applicability
This command was introduced before OcNOS version 4.0 and the command was updated in OcNOS version 4.1.
Example
#show ldp inter-area-fecs
LSR codes : E/N - LSR is egress/non-egress for this FEC,
L - LSR received a label for this FEC,
> - LSR will use this route for the FEC
Code FEC Session Out Label Nexthop Addr
Matching RIB prefix - 1.1.1.0
NL> 1.1.1.1/32 33.33.33.33 52485 11.11.11.1
NL> 1.1.1.2/32 33.33.33.33 52486 11.11.11.1
#show ldp inter-area-fecs count
------------------------
Num. IPv4 FEC(s) : 9
------------------------
------------------------
Num. IPv6 FEC(s) : 0
------------------------
------------------------
Total Num. FEC(s): 9
------------------------
#show ldp inter-area-fecs ipv4 count
------------------------
Num. IPv4 FEC(s) : 9
------------------------
#show ldp inter-area-fecs ipv6 count
------------------------
Num. IPv6 FEC(s) : 0
------------------------
Last modified date: 10/17/2023