clear allowed-ethertype

OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Bridge Commands : clear allowed-ethertype

Use this command to clear statistics for each ethertype per interfaces.

clear allowed-ethertype statistics (IFNAME|)

Parameters

IFNAME

Interface name.

Command Mode

Exec mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

#clear allowed-ethertype statistics xe54/1

#show allowed-ethertype statistics xe54/1

Interface xe54/1

arp: 0 Packets, 0 Bytes

ipv4: 0 Packets, 0 Bytes

ipv6: 0 Packets, 0 Bytes

dropped: 0 Packets, 0 Bytes

Last modified date: 10/12/2023