clear spanning-tree detected protocols

OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Spanning Tree Protocol Commands : clear spanning-tree detected protocols

Use this command to clear the detected protocols for a specific bridge or interface. This command begins the port migration as per IEEE 802.1w-2001, Section 17.26. After issuing this command, the migration timer is started on the port, only if the force version is RSTP or MSTP (greater versions of RSTP).

Command Syntax

clear spanning-tree detected protocols bridge <1-32>

Parameters

<1-32>

Specify the bridge group ID.

Command Mode

Exec mode and Privileged Exec mode

Applicability

This command was introduced before OcNOS version 1.3.

Example

#clear spanning-tree detected protocols bridge 2

Last modified date: 10/12/2023