OcNOS-SP : Layer 2 Guide : Layer 2 Command Reference : Spanning Tree Protocol Commands : spanning-tree restricted-tcn
spanning-tree restricted-tcn
Use this command to set the restricted TCN value of the port to TRUE.
Use the no parameter with this command to set the restricted TCN value of the port to FALSE.
Command Syntax
spanning-tree restricted-tcn
no spanning-tree restricted-tcn
Parameters
None
Default
By default, restricted TCN value is FALSE
Command Mode
Interface mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#interface eth0
(config-if)#spanning-tree restricted-tcn
Last modified date: 10/12/2023