OcNOS-SP : Layer 2 Guide : Layer 2 Configuration Guide : Unidirectional Link Detection Configuration : S2
S2
 
#configure terminal
Enter configure mode.
(config)#udld enable
Enable UDLD globally.
(config)#udld message-time 7
Configure message time for UDLD packets
(config)#interface eth2
Enter interface mode
(config-if)#switchport
Configure the interface as switch port.
(config-if)#udld state enable
Enable UDLD on the interface.
(config-if)udld mode normal
Configure udld mode as normal or aggressive
(config-if)#commit
Commit config.
(config-if)#exit
Exit from the interface mode
Last modified date: 10/12/2023