secondary map class
Use this command to configure a secondary PHB-EXP (Per-Hop Behavior-Experimental) mapping to be used by an E-LSP (EXP-Inferred-PSC LSP). This mapping is different from the node level PHB-EXP mapping.
Use the no parameter with this command to remove a PHB-EXP mapping configuration from current E-LSP PHB-EXP mapping.
Command Syntax
secondary map class-to-exp-bit CLASS <0-7>
no secondary map class-to-exp-bit CLASS <0-7>
Parameters
CLASS
Diff-Serv class (queue) mapped to the particular PHB.
Diffserv class alias e.g: be, ef, af11, etc.
<0-7>
Exp bit that is to be mapped to this PHB.
Default
By default, secondary map class is disabled
Command Mode
Trunk mode
Applicability
This command was introduced before OcNOS version 1.3.
Examples
#configure terminal
(config)#rsvp-trunk T1
(config-trunk)#secondary class-to-exp-bit cs4 3
(config)#rsvp-trunk T1
(config-trunk)#no secondary class-to-exp-bit cs4 3
Last modified date: 10/17/2023