access-if-vpws
Use this command in L2 subinterface mode to create the vpws access-port.
Use the no form of this command to delete the vpws access port.
Command Syntax
access-if-vpws
no access-if-vpws
Parameters
None
Command Mode
L2 Sub-interface mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1.1 switchport
(config-if)#access-if-vpws
(config-acc-if-vpws)#end
Last modified date: 10/17/2023