mpls-vpls
Use this command to bind a VPLS instance to an L2 subinterface.
Use the no form of this command to unbind vpls instance from a L2 subinterface.
Command Syntax
mpls-vpls NAME
no mpls-vpls NAME
Parameters
NAME
VPLS instance name
Command Mode
access-if-vpls mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1.2 switchport
(config-if)#access-if-vpls
(config-acc-if-vpls)#mpls-vpls v100
(config-acc-if-vpls)#end
Last modified date: 10/17/2023