static-mac
Use this command to add a static MAC address to an attachment circuit specific for a VPLS instance.
Use the no parameter with this command to remove static MAC address.
Command Syntax
static-mac XXXX.XXXX.XXXX
no static-mac XXXX.XXXX.XXXX
Parameters
XXXX.XXXX.XXXX
MAC address in HHHH.HHHH.HHHH format
Command Mode
access-if-vpls mode
Applicability
This command was introduced in OcNOS version 5.0.
Examples
#configure terminal
(config)#interface xe1.2 switchport
(config-if)#access-if-vpls
(config-acc-if-vpls)#static-mac 0091.0000.1010
(config-acc-if-vpls)#end
Last modified date: 10/17/2023