OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS Commands : group-name
group-name
Use this command to map the MPLS layer-2 virtual circuit with a specific group.
Use the no parameter with this command to remove group from the MPLS layer-2 virtual circuit
Command Syntax
group-name NAME
no group-name
Parameters
NAME
String identifying group NAME
Default
By default, group-name is disabled
Command Mode
Configure Pseudowire mode
Applicability
This command was introduced before OcNOS version 6.0.0.
Example
#configure terminal
(config)#mpls l2-circuit mycircuit 45678 1.2.3.4
(config-pseudowire)#group-name group-1
 
Last modified date: 10/17/2023