mpls ingress-ttl
Use this command to set a Time to Live (TTL) value for LSPs for which this LSR is the ingress.
Use the no parameter with this command to unset the custom TTL value being used for LSPs for which this LSR is the ingress.
Command Syntax
mpls ingress-ttl <0-255>
no mpls ingress-ttl
Parameter
<0-255>
Set the TTL value to use
Default
By default, mpls ingress-ttl value is 64
Command Mode
Configure mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#mpls ingress-ttl 3
Last modified date: 10/17/2023