OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS Commands : mpls lsp-stitching
mpls lsp-stitching
Use this command to stitch the LSP segment for an FEC created via a different label signaling protocol.
Use the no form of this command to disable this configuration.
Command Syntax
mpls lsp-stitching
no mpls lsp-stitching
Parameters
None
Default
By default, MPLS LSP stitching is disabled.
Command Mode
Configure mode
Applicability
This command was introduced in OcNOS version 3.0.
Command Example
#configure terminal
(config)#mpls lsp-stitching
Last modified date: 10/17/2023