vccv cc-type
Use this command to configure the VCCV control channel for MPLS layer-2 virtual circuit.
Use the no parameter with this command to disable control channel from MPLS layer-2 virtual circuit.
Command Syntax
vccv cc-type (type-1|type-2|type-3)
no vccv cc-type (type-1|type-2|type-3)
Parameters
type-1
CC Type 1 - PWE3 Control Word with 0001b as first nibble
type-2
CC Type 2 - MPLS Router Alert Label
type-3
CC Type 3 - MPLS PW Label with TTL == 1
Default
By default, vccv is disabled
Command Mode
Configure Pseudowire mode
Applicability
This command was introduced before OcNOS version 1.3.
Example
#configure terminal
(config)#mpls l2-circuit mycircuit 45678 1.2.3.4
(config-pseudowire)# vccv cc-type type-2
Last modified date: 10/17/2023