OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS LSP BFD Commands : lsp ping-interval
lsp ping-interval
Use this command to configure periodic MPLS ping echo request for BFD session over MPLS LSP.
Use no form of the command to set default periodic MPLS ping echo request interval.
Command Syntax
lsp-ping-interval <0-1000>
no lsp-ping-interval
Parameters
<0-1000>
Ping interval in sec
Command Mode
MPLS BFD mode.
Applicability
This command was introduced before OcNOS version 5.0.
Example
#configure terminal
(config)# mpls bfd ldp all
(config-mpls-bfd)# lsp-ping-interval 10
 
Last modified date: 10/17/2023