mpls 6pe tunnel-select-policy

OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS Service Mapping Commands : mpls 6pe tunnel-select-policy

Use this command to set tunnel-policy for a 6PE services. This will be used while selecting transport for 6PE services. Use the no parameter with this command to unconfigure tunnel selection policy for 6PE.

Command Syntax

mpls 6pe tunnel-select-policy NAME

Parameters

NAME

Name of tunnel-policy

Command Mode

Configure mode

Applicability

This command was introduced in OcNOS version 4.2.

Examples

#configure terminal

(config)# mpls 6pe tunnel-select-policy policy1

Last modified date: 10/17/2023