OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : MPLS Service Mapping Commands : tunnel-select-policy (For L3VPN service)
tunnel-select-policy (For L3VPN service)
Use this command to set tunnel-policy for a VRF instance. This will be used while selecting transport for L3VPN service.
Use the no parameter with this command to un-configure tunnel-policy from VRF instance.
Command Syntax
tunnel-select-policy NAME
no tunnel-select-policy
Parameters
NAME
Name of tunnel-policy
Command Mode
IP VRF mode
Applicability
This command was introduced in OcNOS version 4.2.
Examples
#configure terminal
(config)#ip vrf vrf1
(config-vrf)#tunnel-select-policy policy1
 
 
 
 
 
Last modified date: 10/17/2023