ac-admin-status
Use this command to configure the admin status of an attachment circuit specific to a VPLS instance.
Command Syntax
ac-admin-status down
no ac-admin-status
Parameter
down
set the admin role as DOWN
Default
By default, ac admin status is up
Command Mode
Interface VPLS
Applicability
This command was introduced before OcNOS version 1.3.
Example
This example shows the configuration of admin status for attachment circuit specific to VPLS instance
#configure terminal
(config)#interface xe1
(config-if)#mpls-vpls vpls1 service-template st1
(config-if-vpls)#no ac-admin-status
Last modified date: 10/17/2023