OcNOS-SP : Multi-Protocol Label Switching Guide : Multi-Protocol Label Switching Command Reference : Virtual Private LAN Service Commands : allow-l2protocol-peer
allow-l2protocol-peer
Use this command to peer L2CP packets.
Command Syntax
allow-l2protocol-peer
no allow-l2protocol-peer
Parameter
NA
Default
By default, L2CP packets are tunneled
Command Mode
Interface VPLS
Applicability
This command is introduced in OcNOS-SP version 5.0
Example
VPLS AC mode
OcNOS(config)#interface xe1/1
OcNOS(config-if)#mpls-vpls vpls1 service-template vc1
OcNOS(config-if-vpls)#allow-l2protocol-peer
OcNOS(config-if-vpls)#no allow-l2protocol-peer
 
Last modified date: 10/17/2023